Netscout OneTouch AT 10G, User Manual

Page: 17 / 248

Chapter 1: Get Acquainted
Safety Information
15
Safety Information
Table 1 shows the international electrical symbols used on the
analyzer or in this manual.

Warning

To prevent possible fire, electric shock, or personal
injury:

Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.

The battery door must be closed and locked before
you operate the Product.
 Repair the Product before use if the battery leaks.

Replace the batteries when the low battery
indicator shows to prevent incorrect measurements.

Turn off the Product and disconnect all cables
before you replace the battery.
 Be sure that the battery polarity is correct to
prevent battery leakage.

Do not disassemble or crush battery cells and
battery packs.
Table 1. Symbols

Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.

Warning: Risk of fire, electric shock, or personal injury.

Warning: Class 1 laser when an SFP module is installed. Risk of eye
damage from hazardous radiation.

Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.