37
WPS Summary
Shows the information of WPA current status, configured, SSID, authentication
mode, and pre-shared key. Click on
Reset OOB
button to Reset WPS AP to the
OOB (out of box) configuration.
WPS Progress
Items
Information
WPS mode
PIN
method (Personal Identification Number):
read the PIN from either a sticker on the new
STA or a display.
PBC
method (Push Button Communication): in
which the user simply has to push a button,
either an actual or virtual one, on both the AP
and the new STA. (Users can simply push the
EZsetup
button
1
on the front panel of the
device
or the
Save Settings
button in this GUI
page after selecting this mode.)
Add Enrollee PIN Code
Users have to fill in the PIN code to enrollee
device if selecting PIN mode as the WPS
Config method.
* Please click on the
Save Settings
button or the
Reset Settings
button on the above table
to save/reset the configurations.
WPS Status
Shows the current WPS status.
1
This button may not supplied depend on your model. Users can click on the
Build WPS Connection
button in the
WPS settings web page to reach the same function.
