–2–
Installing the Modem
1. Remove slip nut from
GSM/GPS antenna (nut
can be discarded).
2. Screw the GSM/GPS
antenna onto the post.
3. Feed the
GSM/GPS
antenna cables
through the fitting
on the top of the
enclosure and
push the antenna
onto the enclosure
bulkhead.
4. Remove the mounting
plate from the back of
the modem. To
separate the two
pieces, push the
button on the top of
the modem, rotate the
plate slightly away,
and slide the mounting
plate downwards.
N O T E
Be careful not to rotate
the plate too far or the
tabs on the bottom
may break.
5. Fasten the mounting plate to the adapter plate using
the 6-
32 x 3/16” pan head screws (qty. 2).
6. Snap the modem into the mounting plate.
