Configuring VLAN Settings
Chapter 6
1HW6WUHDP[8VHU0D
nual
Version 2.1
6-6
2. Choose a site to configure. If you are configuring both sites, choose site
B first.
3. Choose
Management
.
4. Open the
VLAN
tab.
5. Check the
Enabled
box.
6. Enter a VLAN ID. Its value should be between 1 and 4094.
After entering the VLAN ID, only packets with the specified VLAN ID are
processed for management purposes by the ODU. This includes all the
protocols supported by the ODU (ICMP, SNMP, TELNET and NTP). The
VLAN priority is used for the traffic sent from the ODU to the managing
computer. Using VLAN for management traffic affects all types of man-
agement connections (local, network and over the air).
7. Enter a Priority number between 0 and 7.
8. Change the VLAN ID and Priority of the managing computer NIC to be
the same as those of steps 6 and 7 respectively.
9. Click
Apply
or
OK
.
Figure 6-5: Configuring management traffic VLAN Settings
Caution
Changing this parameter causes the Link Manager to immediately
disconnect.To avoid inconvenience, you should verify the change by
setting the VLAN only to one ODU, and only after verifying proper
management operation, change the other ODU VLAN setting.