"
)
$
$
$
$ $
$
$
$
Power On and Indicator Lights
After all connections are made NetPurifier may be powered on by
pressing the power switch on the front of the unit. The green
indicator light indicates that NetPurifier is powered on and
functioning normally. The yellow light indicates disk activity.
Note:
After power on, NetPurifier will take
approximately two minutes before it is ready for
operation.
To power off NetPurifier press the power button. All indicator lights
will extinguish.
Connecting a browser to NetPurifier
Configuration of NetPurifier is done by way of TCP/IP using a
Browser. The following browsers have been tested with
NetPurifier.
Internet Explorer 4 or newer
Netscape 4 or newer
Opera
NetPurifier is configured from the factory for the
192.168.1.0/255.255.255.0 subnet. If your network is already
using this subnet then you are ready to configure NetPurifier.
If your network is not using this subnet then you will need to
configure the computer that will configure NetPurifier to
temporarily reflect a static IP on the 192.168.1.x network. This is
done as follows:
Summary of Contents for Version 3
