[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Device Overview: Appearance
and Basic Specifications of a Device
[ENG] [2PWR,v2SMS] Device Overview: Appearance and Basic Specifications of a Device
–
[ENG] [2PWR,v2SMS] Device Overview: Appearance and Basic
Specifications of a Device
It is possible to plug up to two electricity consumers with a total capacity of 1000 Watts to a device through
controlled electric 220V sockets. To be protected from a short circuit in load and/or exceeding a maximum
allowable capacity, a device is equipped with automatic built-in self-resetting fuse. Load power distribution is
random between two channels. Load connected to a device is controlled through own web interface, via an SNMP
protocol, using URL-encoded commands (HTTP API) and using SMS commands (for a
reboot connected equipment using power supply if it freezes or according to a previously specified schedule.
Electric load is controlled for each of two channels independently. At the same time, each channel can be possibly
set up individually.
Appearance of Devices
Picture 1
– Front view (
device)
