Netopia 3-D Reach Utility User Manual Download

Page: 5 / 64

Netopia 3D Reach Utility Installation

For Microsoft Windows 98SE, ME, 2000

Inser t the CD. The Setup utility will run automatically and load the driver for the Netopia
3D Reach Wireless PC Card.

When the installation is complete, a new Wireless communication icon will appear in
your system tray in the Windows toolbar.

Click the Wireless icon to star t the Netopia WLAN Utility. See

“Star t the Netopia 3D

REACH Utility” on page 4

For Microsoft Windows XP

Inser t the CD. The Setup utility will run automatically and load the driver for the Netopia
3D Reach Wireless PC Card.

When the installation is complete, a new Wireless communication icon will appear in
your system tray in the Windows toolbar.

Click the Wireless icon to star t the Windows Zero Configuration Utility. Refer to
Microsoft for documentation on the utility.

Macintosh Mac OS X 10.2 and higher and Linux drivers

The Netopia 3-D Reach Utility only suppor ts Windows 98, 2K, ME, and XP. Additional driver
suppor t for other Operating Systems may be downloaded from the Ralink Suppor t website
at

www.ralink.com.tw

. These drivers have not been tested and are not suppor ted by

Netopia.

Summary of Contents for 3-D Reach Utility

































































Search results

Summary of Contents for 3-D Reach Utility

Reviews:

Related manuals for 3-D Reach Utility

Brands by name

Popular brands

Netopia 3-D Reach Utility, User Manual

Search results

Summary of Contents for 3-D Reach Utility

Reviews:

Related manuals for 3-D Reach Utility

Brands by name

Popular brands