NetModule NB3000-Line-Hd User Manual Download Page 16

Page: 16 / 225

NB3000-Line-Hd User Manual 4.2

3.2. Features

The standard Type of the NB3000-Line-Hd router (with IP65 compliant case) is the NB3800

with following functionalities:

• Galvanically isolated power supply

• 2 Gbit Ethernet ports (M12, x-coded)

• 3 Fast Ethernet ports (M12, d-coded)

• 1 USB 2.0 host port

• 4 mini SIM card slots

• Extension port

The NB3000-Line-Hd can be equipped with the following options:

• LTE / LTE 450MHz / LTE US

• CDMA 450MHz

• WLAN IEEE 802.11ac

• GPS/GNSS

• GSM-R

• RS-232

• RS-485

• IBIS

• CAN

• Audio

• 1 TB internal storage

• Software Key Virtualization

• Software Key Server

• Software Key Voice

Due to its modular approach, the NB3000-Line-Hd router and its hardware components can

be arbitrarily assembled according to its indented usage or application. Please contact us in

case of special project requirements.

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands