NetMedia NM-MM70 Quick Start Manual Download Page 2

NM-MM70

NM-MM70

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com 

MAN-MM70     REV0708A

Figure 1 - Setting the modulated channel with the switches. Valid channels are UHF 14-69, CABLE 70-94, 100-125.

80    40    20    10     8      4       2      1

ON

OFF

CABLE Channel 125

Add numbers 

switched ON

to set channel.

80    40    20    10     8      4       2      1

ON

OFF

UHF Channel 25

Installation Procedures:

1. Remove the End Plate from the modulator assembly and set the channel with the switches as shown in 

Figure 1. Choose an unused channel that matches the tuning mode of the televisions. With antenna tuning, 
choose a UHF channel from 14-69. With cable tuning,  choose a CABLE channel from 70-94 or 100-125. There 
must be at least one blank channel on either side of the modulated channel to separate it from any other 
broadcast,  cable,  or  modulated  source.  When  combining  with  cable  service,  be  aware  that  digital  data 
typically interferes with channels 80-117, even when not subscribed to digital services. If no channels are 
available then a filter such as NetMedia’s CNF7080 (ch. 70-80) may be necessary.

2. Connect a video source to the modulator’s RCA Video Input Connector. Adapter’s such as BNC to RCA may 

be used as necessary. If audio is available, connect it to the RCA jacks of the Dual RCA Audio Cable. Insert the 
Audio Cable’s 3.5mm plug into the modulator’s Audio Input Connector.

3. Connect a coax cable from the modulator’s F connector to the coax from a television or distribution system. 

Connect the 12V DC 100mA power supply to an AC outlet. The modulator picture is now available on the 
programmed TV channel.

 

 

 

Figure 2 - Connecting the modulator to an antenna or cable service and distributing to multiple televisions.

Main cable or 

Antenna

Television

Television

Distribution

Panel

or Splitter

Splitter/

Combiner

Optional Ch. 70-80 Filter (NM-CNF7080)

when there are no clear cable channels.

Modulator

Figure 3 - Connecting the modulator to a satellite system and distributing to multiple televisions. 

Dual LNB 

Satellite 

Satellite 

Multiswitch 

w/Ant input 

Satellite 

Diplexer 

Television 

Satellite Receiver 

Sat In 
Ant In 

 

Modulator 

Reviews: