-22-
3-3 Using the Telnet
The Inter-Building Access Point can be configured via the command prompt console with
TCP/IP:
Telnet (TCP/IP) Connection
: Assign an IP address to your Inter-Building Access Point
through the RS232 connection or Access Point Utility and then telnet to the Inter-Building
Access Point anywhere to get access to the Inter-Building Access Point console. Thus, you
will be able to make the configuration via the TCP/IP connection.
1.
Telnet to your Inter-Building Access Point. A window will show up.
2.
Enter the password. The default password is “
default
”.
3-2-1 Basic Commands
The following are the commands provided for configuring the Inter-Building Access Point. In
loader mode, i.e., no valid firmware in the Inter-Building Access Point, only the commands
with an asterisk (*) are provided.
NOTE:
[xxx] stands for optional arguments.
