Follow these steps to setup Transparent
Client/s.
Step 1
Select the
Remote AP MAC
checkbox.
Enter the
Remote AP MAC
. Check the MAC
address of your Remote AP under About
system >> Wireless MAC.
Ensure that
The Current Mode
is set to
Transparent Client
.
Step 2
Select the
Remote AP MAC
checkbox.
Enter the
Remote AP MAC
. Check the MAC
address of your Remote AP under About
system >> Wireless MAC
Note:
When using
Remote AP MAC
, the
ESSID
name must also match the AP’s ESSID name,
especially when Closed System is enabled on
the AP.
Repeat the Transparent Client steps to add
more Clients to the Point-to-MultiPoint
connection.
