Setup Requirements
Before starting, please verify that the
following is available:
•
CAT5/5e or FTP Outdoor Ethernet
cable (from the CPE to PoE Injector)
•
At least one computer is installed with
a Web browser and a wired or wireless
network interface adapter
•
TCP/IP protocol is installed and IP
address parameters are properly
configured on all your network’s nodes
Important!
•
Configure and verify the CPE
operations first before you mount the
unit in a remote location.
•
You may need to install a lightning
arrestor to protect your CPE from
lightning.
•
For choosing the best location for your
CPE choose an elevated location
where trees, buildings and large steel
structures will not obstruct the antenna
signals and which offers maximum
line-of-sight propagation with the
users.
