Netis SEC111, Quick Installation Manual

Page: 14 / 20

5. Hardware Installation
There are three steps to install the wireless IP camera & NVR security kit:
Step 1 : Well locate the wireless NVR
Wireless NVR is suggested to be located in the center of monitoring regional. Barrier
should be avoided between wireless IP camera and wireless NVR, as the signal
coverage is easily affected by the physical properties of the barrier and surrounding.
Note : When IP cameras working synchronously, the distance should be kept within 60
meters without barrier, 30 meters with a wall, 15 meters with two walls.(for installation
reference)
Step 2 : Testing the effective coverage of wireless signal
Please select “ Main Menu ” -> “ System setup ” -> “ Network setup ” -> “ Wireless ” ->
“ Wireless setup ”, check the wireless SSID and Password, then connect the Wi-Fi with
your mobile phone. More than two bars signal will be better under the effective
coverage.
Note : While testing the signal strength, please wait for more than 1 minute to ensure
the signal is stably.
netis 4CH Wireless IP Camera & NVR Security Kit Quick Installation Guide
Step 3 : Install and fasten wireless IP camera
Install the wireless IP camera in the location under the effective Wi-Fi coverage, and
connect to the provided 12V/1A power adapter. The video of will be shown on the
display device after 1 minute.
Step 4 : Set the angle of the wireless IP camera. The installation is finished.
Note : For security, please forbid the SSID broadcast after the installation is finished.
!
11