Getting Started Using FirstGear for the Model XM128S ISDN Digital Modem
3-12
Installation
5.
Select the appropriate Model XM128S modem driver for the dial-up connection.
Each dial-up connection can use a different Model XM128S modem driver. Each driver
automatically selects the appropriate protocol and data rate. For example, you may want
to use the driver called Netgear XM128, Internet PPP 64K for your 64K connection to your
remote LAN while you are telecommuting. On the other hand, you can set up a second dial-up
connection with the Netgear XM128, Internet PPP 128K driver for your 128K Internet
connection through your local ISP. Each dial-up connection uses a different driver.
6.
Click on Next.
The second Make New Connection screen, as illustrated in
Figure 3-10
, opens.
Figure 3-10.
Make New Connection screen for entering ISP information
7.
Type the phone number of the Internet service provider (ISP) or host you will be calling.
8.
Click on Next.
9.
Click on Finish.
A new icon is created in the Dial-Up Networking folder.
If your ISP requires you to enter DNS and WINS addresses, perform steps 10 through 18.
Otherwise, proceed to step 19.
XM128S_bk.fm.book Page 12 Friday, March 6, 1998 11:33 AM
