November 2010
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and other countries. Other brand and product names are
trademarks or registered trademarks of their respective holders. Information is subject to change without
notice.
LED and Button Descriptions
Item
Description
Power
LED
• Solid green. The electrical power is on.
• Blinking green.The adapter is in the process of restarting or setting up security.
• Amber. Power saving mode.
• Off. There is no electrical power.
Powerline
LED
• Solid. The adapter is connected to a Powerline network.
• Blinking. The adapter is sending or receiving data.
• Off. The adapter has not found any other compatible Powerline devices using
the same encryption key.
The Pick A Plug feature lets you pick the electrical outlet with the strongest link
rate, indicated by the color displayed by the LED:
Green:
Link rate > 80 Mbps
(Best)
Amber:
Link rate > 50 and < 80 Mbps
(Better)
Red:
Link rate < 50 Mbps
(Good)
Power
Filtered
Security/Power
Factory Reset
Ethernet port
AC Socket
Powerline LED
LED
Ethernet LED
Warning:
Do not press the
Security/Power
button on the Powerline adapter until installation is
complete and the adapters are communicating with each other (indicated by the blinking
Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If
this should occur, use the
Factory Reset
button to return the Powerline adapter to its factory
default settings.
Warning:
To reduce the torque on the AC outlet caused by the weight of the XAV1501, only a right-
angled power cord can be plugged into the filtered AC socket of the XAV1501 GR(German) and
FR(French), and the power cord cannot be bent.
Important Safety Information
•
AC input:100-125V~, 0.1A (Max;NA) and 200-250V~, 0.1A (Max;others),
for product only.
•
Operating temperature: 0C~40C
•
The socket-outlet shall be installed near the equipment and be easily accessible.
•
XAV1501 ratings (maximum load):
Ethernet
LED
• Solid. The Ethernet port is linked, but there is no activity.
• Blinking. There is traffic on the Ethernet port.
• Off. There is no Ethernet connection.
Factory
Reset
Press the Factory Reset button for 1 second, then release to return the Powerline
adapter to its factory default settings.
Security/
Power
Button
The
Security/Power
button serves a dual function:
•
Set the Power Mode
: The Powerline Adapter’s normal state is POWER ON.
When you first plug it into an electrical outlet, it will be in POWER ON mode. To
go to POWER OFF (power saving mode), push and hold the button for 5 – 10
seconds. Pressing the button again for less than 2 seconds returns it to POWER
ON. You can also unplug and plug in the adapter to restore it to POWER ON.
•
Set Security
: Press and hold the button for 2 – 4 seconds. If you are setting up
two XAV1501 devices, push the button on each device for 2 – 4 seconds within 2
minutes. The two devices will connect automatically and the Power LED will
start blinking.
Filtered
AC Socket
The filtered AC socket can remove some electrical noise which may affect power-
line performance. Plugging the power plugs of nearby devices into the filtered
AC socket may improve performance.
Item
Description
-- EU: 15A 250V~
-- UK: 12A 250V~ – NA: 14A 125V~
•
Only power cords are allowed to be inserted into the filtered AC outlet; no other
equipment with a direct plug-in is allowed. Power cord needs to be a maximum of
1m long and a minimum of 0.75mm square of cross-sectional area.
•
Do not plug devices into the XAV1501 filtered AC outlet that exceed the product
ratings.The output voltage of the filtered AC outlet is the same as the power outlet
which the XAV1501 is plugged into. To help avoid damaging your system, be sure
that the attached devices are electrically rated to operate with the power available
in your location.
•
If the input AC voltage is less than 125Vac, the device plugged into the filtered AC
socket of the XAV1501 may not perform as well as expected.
•
DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an
attached powerstrip. The device is not intended to be used with home appliances
such as air conditioners, powertools, space heaters, fans, hair dryers, ovens, or
refrigerators.
•
Check the electrical current for any appliance used with the device, and do not
exceed home and product outlet ratings and electrical requirements.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at
http://www.NETGEAR.com/register
. Registration is
required before you can use our telephone support service. Registration via our
website is strongly recommended.
To access the XAV1501 utility, go to
http://support.netgear.com/app/answers/detail/a_id/17428
Go to
http://kbserver.netgear.com
for product updates and Web support.
GPL may be included in this product; to view the GPL license agreement, go to:
ftp://downloads.netgear.com/files/GPLnotice.pdf
For complete DoC, please visit the NETGEAR EU Declarations of Conformity website
at:
http://kb.netgear.com/app/answers/detail/a_id/11621/
