NETGEAR WNR834, Setup Manual

Page: 19 / 42

Installing Your Router Manually (Advanced, Mac, and Linux Users) 15
6.
Locate the Ethernet cable (
D
) that is attached to your computer (see Step 3). Securely insert
that cable into a LAN port on the router, such as LAN port 1 (
E
), as shown in Figure 9 .
7.
Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
one of the three remaining LAN ports.
When your network cables are connected as shown in Figure 9 , you are ready to start your
network. Start your network in the correct sequence, as described below.
Figure 8
Figure 9
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
C
D
E