Hardware Setup
12
N600 Wireless Dual Band Router WNDR3400v3
LAN ports
1–4
•
Solid green
. The LAN port has detected a 1,000 Mpbs link with an attached device.
•
Blinking green
. Data is being sent at 1,000 Mbps.
•
Solid amber
. The LAN port has detected a 10 Mbps link with an attached device.
•
Blinking amber
. Data is being sent at 100 Mbps or 10 Mbps.
•
Off
. No link is detected on this port.
5 GHz
5
GHz
•
Solid blue
. The wireless radio is operating.
•
Blinking blue
. Data is being sent or received over the wireless network.
•
Off
. The wireless radio is off.
2.4 GHz
2.4
GHz
•
Solid blue
. The wireless radio is operating.
•
Blinking blue
. Data is being sent or received over the wireless network.
•
Off
. The wireless radio is off.
Internet
•
Solid amber
. The IP address has not been acquired.
•
Solid green
. An IP address has been received; ready to transmit data.
•
Blinking green
. Data is being sent to or received from the Internet.
•
Off
. No Ethernet cable is connected between the router and the modem.
Power/Test
•
Solid amber
. The unit is starting up after being powered on.
•
Solid green
. The power is on and the router is ready.
•
Blinking amber
. A firmware update is in progress.
•
Blinking green
. The firmware is corrupt.
•
Off
. Power is not supplied to the router.
WPS
•
Solid green
. Indicates that wireless security is enabled.
•
Blinking green
. The router is using WPS to add a wireless device to the network.
•
Off
. No WPS connection exists.
Table 1. Front panel LED descriptions (continued)
LED
Description
