Attention:
This product is certified for Switzerland and all EU-countries.
©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy. Everybody’s
Connecting and Auto Uplink are trademarks or registered trademarks of Netgear, Inc. in the
United States and/or other countries. Microsoft and Windows are registered trademarks of
Microsoft Corporation in the United States and/or other countries. Other brand and
product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice. All rights reserved.
Windows 2000, Me or 98 Basic Installation
1
1
First, install the WG121 software
a. Power on your notebook, let the operating system boot up
completely, and log in as needed.
b. Insert
the
54 Mbps Wireless USB 2.0 Adapter Resource CD
for
the WG121 into your CD-ROM drive. The CD main page
shown below will load.
Note:
If this page does not
automatically load, browse
to the CD and double-click
on
autorun.exe
.
c. Click
the
Install Driver & Utility
link.
d. Follow the InstallShield Wizard steps, click
Finish.
If prompted
to restart your computer, do so.
2
2
Next, install the WG121 54 Mbps Wireless
USB 2.0 Adapter
a. Connect the USB cable to the WG121 and plug the other end of
the cable in to a USB port on your PC.
Note:
If Windows 2000
displays a Digital Signature Not
Found warning, click
Yes
to
continue the installation.
b. Follow the InstallShield Wizard steps, and click
Finish
. If
prompted to restart your computer, do so.
c. You will now see the WG121 system tray icon in the lower
right portion of the Windows task bar.
3
3
Now, configure your WG121 and save the profile
a. Click the WG121 icon in the Windows system tray
to open the Smart Wizard Wireless Utility.
The utility opens to the Settings tab page.
b. Change the Network Name SSID to match your network.
Tip:
To view the available wireless networks, use the dropdown
list or the Networks tab and choose the one you want.
c. Click
Apply
to activate the connection.
Tip:
Create
work
and
home
profiles. Then, activate whichever
one you need for your current location.
4
4
Finally, verify wireless network connectivity
a. Verify that the status monitor information at the bottom of the
utility matches your wireless network
b. Check with WG121 LEDs: both lights on indicates a good
connection; if the right light is on and the left light is blinking, it
means attempting to connect; and if both lights are off, it means
the adapter is not plugged in.
c. Verify connectivity to the Internet or network resources
Note:
If you are unable to connect, see the troubleshooting tips in the
Basic Installation section of the
User’s Guide
on the
54 Mbps Wireless
USB 2.0 Adapter Resource CD
.
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT
SHIPPED WITH YOUR PRODUCT.
By registering your product at
www.NETGEAR.com/register
, we can
provide you with faster expert technical support and timely notices of
product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support
See Support information card for other countries.
E-mail: [email protected] (24 x 7 online support)
www.NETGEAR.com
*M-10205-01*
M - 1 0 2 0 5 - 0 1
August 2003
WG121 Install Guide.qxd 8/28/03 4:27 PM Page 4
