background image

Ceiling and Wall Installation

NETGEAR Insight Managed 

Smart Cloud Wireless Access Point (WAC505)

802.11 Wave 2 AC1200

The installation kit includes components that let you mount the access point 
to a drop ceiling (that is, to a ceiling bar) or to a wall and rubber feet for 
desk installation.

Drop Ceiling Installation

Before mounting the access point in a high location, first set up and test the 
access point to verify WiFi network connectivity.

If you are mounting the access point on a hard ceiling instead of a ceiling bar 
that is typical for a drop ceiling, use the wall installation instructions.

 

¾

To mount the access point to a drop ceiling:

1.  Slide the T-bar partially into 

the metal bracket and attach 
the metal bracket to the 
ceiling bar. 
Then push the T-bar over 
the ceiling bar and use the 
lock screw to lock the metal 
bracket into place.

2.  Making sure that the two 

protruding hooks on the plastic 
bracket are facing down, place 
the plastic bracket against the 
metal bracket and align the 
four inner holes of the plastic 
bracket with the four holes of 
the metal bracket.
Then insert the four short 
screws and secure the plastic 
bracket onto the metal 
bracket.

Package Contents Ceiling and Wall Installation Kit

•  Plastic bracket for either drop ceiling mounting or wall mounting. (

1

)

•  Metal bracket for drop ceiling mounting. (

2

)

•  One metal T-bar for drop ceiling mounting. (

3

)

•  One lock screw to lock the T-bar for drop ceiling mounting. (

4

)

•  Four short screws to attach the metal bracket for drop ceiling mounting. (

5

)

•  Four tall screws to attach the plastic bracket for wall mounting. (

6

)

•  Four anchors for the tall screws for wall mounting. (

7

)

•  Four rubber feet for desk installation. (

8

)

3.  Hold the access point 

upside down, with the 
bottom facing the plastic 
bracket that is attached to 
the metal bracket, and align 
the two rectangular holes 
in the bottom of the access 
point with the protruding 
hooks on the plastic 
bracket.

4.   Push the hooks into the 
      holes and turn the access 
      point to secure it onto the 
      plastic bracket

The figure to the right 
shows the final result.

4

5

6

7

8

1

2

3

Reviews: