4. Select Administration > Status.
The following table describes the fields and columns of the table on the page.
Description
Field or Column
The time elapsed since the AP was last restarted.
System Up Time
The statistics for the LAN (Ethernet) ports, WLAN b/g/n, and WLAN a/n/ac ports. For
each port, the page displays the information that is described in this table.
Port
The link status of the port.
Status
The number of packets transmitted on this port since reset or manual clear.
TxPkts
The number of packets received on this port since reset or manual clear.
RxPkts
The number of packets that collided on this port since reset or manual clear.
Collisions
The detected rate of packet transmission in bytes per second on this port.
Tx B/s
The detected rate of packet reception in bytes per second on this port.
Rx B/s
The time elapsed since this port acquired the link.
Up Time
The interval at which the statistics are updated on this page. For more information,
see Change the traffic statistics polling frequency on page 65.
Poll Interval
Change the traffic statistics polling frequency
You can change the polling frequency or stop traffic polling. For information about the
traffic statistics, see View the traffic statistics on page 64.
User Manual
65
Manage the AP and Monitor the
Traffic
802.11ac Wireless Access Point Model WAC104
