
Installation Guide for the Model SW510 and Model SW518 Ethernet Switches
Applications
3-3
Key:
1 = Model SW518 Ethernet switch (Normal/Uplink push button to configure port 18 set to Uplink position)
2 = Server with 20 Mbps connection (adapter card installed in server; duplex toggle switch for port 7 on
Model SW518 switch set to full-duplex mode)
3 = Model FS508 Fast Ethernet switch serving as network backbone (A Fast Ethernet hub can also be used.)
4 = Model EN516 Ethernet hubs (Normal/Uplink push button set to Uplink position)
5 = Server with 10 Mbps connection
6 = PCs with 10 Mbps connection
7 = PCs with 100 Mbps connection
Figure 3-2.
Model SW518 switches used for network segmentation and as a
multiport bridge to a high-bandwidth backbone
Note:
Full-duplex operation applies to point-to-point access only when attaching the
switch to a workstation, a server, or another switch. When connecting to a repeater or a
hub, set the port for half-duplex operation.
Link
Full
Link
Full
Link
Full Link
Full
683EA
6
7
5
3
2
4
4
1
4
SW510.bk Page 3 Wednesday, March 12, 1997 10:49 AM