Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
2-2
Introduction
202-10090-02 v 1.4, July 2005
•
Flash memory for firmware upgrade.
802.11g Wireless Networking
The WGT624 v3 wireless router includes an 802.11g wireless access point, providing continuous,
high-speed 54 Mbps access between your wireless and Ethernet devices. The access point
provides:
•
802.11g wireless networking at up to 108 Mbps.
•
802.11g wireless networking, with the ability to operate in 802.11g-only, 802.11b-only, or
802.11g and b modes, providing backwards compatibility with 802.11b devices or dedicating
the wireless network to the higher bandwidth 802.11g devices.
•
64-bit and 128-bit WEP encryption security.
•
WEP keys can be generated manually or by passphrase.
•
WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which
provides strong data encryption and authentication based on a pre-shared key.
•
Wireless access can be restricted by MAC address.
•
Wireless network name broadcast can be turned off so that only devices that have the network
name (SSID) can connect.
A Powerful, True Firewall with Content Filtering
Unlike simple Internet sharing NAT routers, the WGT624 v3 is a true firewall, using stateful
packet inspection to defend against hacker attacks. Its firewall features include:
•
Denial of Service (DoS) protection.
Automatically detects and thwarts DoS attacks such as Ping of Death, SYN Flood, LAND
Attack, and IP Spoofing.
•
Blocks unwanted traffic from the Internet to your LAN.
•
Blocks access from your LAN to Internet locations or services that you specify as off-limits.
•
Logs security incidents.
The WGT624 v3 will log security events such as blocked incoming traffic, port scans, attacks,
and administrator logins. You can configure the router to email the log to you at specified
intervals. You can also configure the router to send immediate alert messages to your email
address or email pager whenever a significant event occurs.
