Maintenance
41
NETGEAR ReadyNAS Rack-Mount Storage Systems
2.
Pull out the disk dray and place a disk in the tray.
3.
Assemble the disk tray.
Make sure that the hard disk connectors face the interior of the disk bay when you
reassemble the disk.
4.
Slide the disk tray into the unit and secure the handle.
The volume automatically synchronizes with the new disk in the background. This could
take several hours depending on the disk size. You can continue to use your ReadyNAS,
although access is slower until the volume synchronization finishes. You are notified by
email when the process is complete.
If you are adding disks to a diskless unit, see the
ReadyNAS for Business Software
Manual
for information about using RAIDar to discover your unit on your local area
network for the first time.
To add a disk to a 3100, 3200, or 4200:
1.
Pull the disk tray release pull switch.
The tray handle pops out.
2
1
1. Disk tray handle
2. Disk tray release pull switch
