NETGEAR RangeMax Next WPN111, User Manual

Page: 35 / 64

NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual
2-9
v1.0, December 2007
Manually Selecting a Wireless Network
During the WN111 software installation, the Smart Wizard lists the available networks. After
installation you can use the Join a Network button or the Networks tab at any time to view the
available networks and select the one that you want to use.
Depending on whether or not a wireless access point or router in the network supports Wi-Fi
Protected Setup (WPS), the Smart Wizard presents different screens to manually configure a
network.
Manually Selecting a Wireless Network in a WPS Configuration
To manually join a network in which a wireless access point or router supports WPS:
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network.
Note: Make sure that you know the security settings for the network that you want to use.
For example, if WEP is used then you need to know the WEP key. If you use
secure networks frequently, set up profiles for each network with the wireless
network and security settings.
Figure 2-11
Note: Instead of clicking Join a Network on the status bar, you can also click the
Networks tab on the Smart Wizard Settings screen. Then, select a network.