May 2011
©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
Manual Installation (PC with No CD Drive)
1.
Follow Steps 1-3 to connect the DGN3500 to your computer.
2.
Check that the power LED is green, and if not, turn on the modem router and
wait for the power LED light to turn green.
Set up Internet Connectivity
1.
Type
http://www.routerlogin.net
in the web browser address bar and click
Enter
.
2.
Type
admin
for the user name and
password
for the password. Click
OK
.
3.
Select
Setup Wizard
in the top left corner, and make sure
Yes
is selected
under
Auto-Detect Connection Type
. Click
Next
to complete the Setup
Wizard.
4.
Select
Basic Settings
to see your settings.
Note:
If your ISP requires that you enter a user name or password, you are prompted
to enter this information. If you do not have this information, contact your ISP.
ISP user name: _______________________________________
ISP password: ________________________________________
Set up Wireless Security
This product is preconfigured with a preset unique WiFi Network Name (SSID),
security type, and password that are located on the label on the bottom of the
unit. The default SSID and password are uniquely generated for every device to
protect and maximize your wireless security.
NETGEAR recommends that you not change the WiFi Network Name (SSID),
security type, or password. If you do change these settings during the installation
process, the information on the bottom of the unit will no longer apply.
If you changed the default wireless settings, record them here:
Enter your wireless information here:
Wireless Network Name (SSID)
________________________________
Network Key (Password)
__________________________________
To retrieve your password, type
http://www.routerlogin.net
and log in with
the user name
admin
and your password (default is
password
).
Select
Wireless Settings
to retrieve your password.
Unique
WiFi Network
Name (SSID)
Unique
Network Key
(password)
Connect Wireless Devices to Your Router
Choose either the manual or WiFi Protected Setup (WPS) method to add wireless
devices and other equipment to your wireless network.
Manual Method
1.
Open the software that manages your wireless connections on the wireless
device (iPhone
®,
laptop computer, gaming device) that you want to connect to
your router. This software scans for all wireless networks in your area.
2.
Look for your network and select it. If you did not change the name of your
network during the setup process, look for the default WiFI Network Name
(SSID) and select it. The default WiFI Network Name (SSID) is located on the
product label on the bottom of the router.
3.
Enter the passphrase and click
Connect
. The default passphrase is located on
the product label on the bottom of the router.
4.
Repeat steps 1-3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (Push ‘N’ Connect), follow these steps:
1.
Press the WPS button on the router. It looks similar to
.
2.
Within 2 minutes, press the WPS button on your wireless device, or follow the
WPS instructions that came with your wireless device. The device is now
connected to your router.
3.
Repeat steps 1-2 to add other wireless devices.
For complete DoC visit the NETGEAR EU Declarations of Conformity website at:
http://kb.netgear.com/app/answers/detail/a_id/11621/
