NETGEAR R6900v2 User Manual Download Page 205

Page: 205 / 229

Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.

The previous figure shows two custom port forwarding rules.

Make sure that the Port Forwarding radio button is selected.

In the table, select the radio button for the service or application name.

Click the Edit Service button.

The Ports - Custom Services page displays.

Change the settings.

For information about the settings, see

Add a Port Forwarding Rule With a Custom Service or Application

on page 203.

Click the Apply button.

Your settings are saved. The changed rule displays in the table on the Port Forwarding / Port Triggering
page.

Remove a Port Forwarding Rule

You can remove a port forwarding rule that you no longer need.

To remove a port forwarding rule:

Launch a web browser from a computer or mobile that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Manage Port Forwarding and Port Triggering

205

Nighthawk AC1900 Smart WiFi Router Model R6900v2

Summary of Contents for R6900v2






































































































































































































































Search results

Summary of Contents for R6900v2

Reviews:

Related manuals for R6900v2

Brands by name

Popular brands

NETGEAR R6900v2, User Manual

Search results

Summary of Contents for R6900v2

Reviews:

Related manuals for R6900v2

Brands by name

Popular brands