NETGEAR R6400v2 User Manual Download Page 162

Page: 162 / 178

Specify Internet Port Settings

162

AC1750

Smart WiFi Router

The Port Forwarding/Port Triggering page displays.

Select the

Port Triggering

radio button.

Click the

Add Service

button.

In the

Service Name

field, type a descriptive service name.

In the

Service User

menu, select

Any,

or select

Single address

and enter the IP address

of one computer:

•

Any

(the default) allows any computer on the Internet to use this service.

•

Single address

restricts the service to a particular computer.

Select the service type, either

TCP

UDP

TCP/UDP

(both).

If you are not sure, select

TCP/UDP

10.

In the

Triggering Port

field, enter the number of the outbound traffic port that will open the

inbound ports.

11.

Enter the inbound connection port information in the

Connection Type

Starting Port

, and

Ending Port

fields.

12.

Click the

Apply

button.

The service is now in the Portmap table. You must enable port triggering before the router
uses port triggering. See

Enable Port Triggering

on page

162.

Enable Port Triggering



To enable port triggering:

Launch an Internet browser from a computer or mobile device that is connected to the

network.

Type

http://www.routerlogin.net

http://www.routerlogin.com

A login window opens.

Enter the router user name and password.

The user name is

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands