NETGEAR R6400v2 User Manual Download Page 155

Page: 155 / 178

Use VPN to Access Your Network

155

AC1750

Smart WiFi Router

Select

ADVANCED > Advanced Setup > VPN Service

The VPN page displays.

Select the

Enable VPN Service

radio button.

Scroll down to the Clients will use this VPN connection to access section, and select the

Home Network only

radio button.

This is the default setting. The VPN connection is only to your home network, not to the
Internet service for your home network.

Click the

Apply

button.

Your settings are saved.

Click

For Windows

For Non Windows

button and download the configuration files for

your VPN clients.

Unzip the configuration files and copy them to the folder where the VPN client is installed on

your device.

For a client device with Windows 64-bit system, the VPN client is installed at

C:\Program files\OpenVPN\config\

by default.

Use a VPN Tunnel to Access Your Internet Service at Home



To access your Internet service:

Set up the router to allow VPN access to your Internet service.

See

Set Up VPN Client Internet Access in the Router

on page

153.

On your computer, launch the OpenVPN application.

The

OpenVPN

icon displays in the Windows taskbar.

Right-click the icon, and select

Connect

When the VPN connection is established, launch your Internet browser.

Summary of Contents for R6400v2



















































































































































































Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands

NETGEAR R6400v2, User Manual

Search results

Summary of Contents for R6400v2

Reviews:

Related manuals for R6400v2

Brands by name

Popular brands