Reset methods
DO NOT "30-30-30" Reset ARM Devices!
GUI Reset
To restore default nvram settings either:
Select the factory reset option from the firmware upload GUI drop-down menu:
Administration->Firmware Upgrade
♦
Select the firmware file and "reset to defaults" from the drop-down menu, then click Upgrade
♦
•
...or use the reset to default settings option:
Administration->Factory Defaults
♦
Select radio button, then Apply settings
♦
•
Command Line Interpreter (CLI) Reset
Telnet (or SSH, if enabled) to the device and see Erasing NVRAM, as this is build-dependent.
Reset Button
With the firmware is running normally, hold the reset button until the lights flash (10-20 seconds).
Reset notes
In February 2015 Kong stated a reset is required for certain upgrades, such as certain wireless driver updates].
While not usually necessary, reset and manual configuration should be performed if any issues are
encountered, and only report issues after this is done. Do NOT restore an nvram backup (NVRAMBAK) from
previous builds in these cases, as it will undo the reset.
Netgear_R6400v1
Reset methods
2
