May 2004
©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, Everybody's connecting, Auto Uplink and ProSafe are
trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and
Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other
brand and product names are trademarks or registered trademarks of their respective holders. Information is sub-
ject to change without notice. All rights reserved.
Install the Switch
To install your switch on a flat surface, you do not need any special tools. Be sure the
switch is positioned with at least 2 inches of space on all sides for ventilation.
To install the switch in a rack, first attach the mounting brackets to the side of the switch.
Insert the screws provided in the rack mount kit through each bracket mounting hole in
the switch. Tighten the screws with a #1 Phillips screwdriver to secure each bracket. Align
the mounting holes in the brackets with the holes in the rack and insert two pan-head
screws with nylon washers through each bracket and into the rack. Tighten the screws
with a #2 Phillips screwdriver to secure the switch in the rack.
Connect the Devices
To connect devices to the switch:
1.
Connect the devices to the 10/100/1000 Mbps ports on the switch, using Category 5
UTP cable and RJ-45 plug.
Note:
Ethernet specifications limit the cable between your PC or server and the
switch to 328 feet (100 meters) in length.
2.
Connect one end of the DC power adapter cable to the power outlet on the rear
panel of the switch and other end of the power adapter cable to wall outlet.
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED
WITH YOUR PRODUCT.
By registering your product at
www.NETGEAR.com/register
, we can provide you with
faster expert technical support and timely notices of product and software upgrades.
JGS516
IEEE 802.3i 10BASE-T Ethernet,
IEEE 802.3u 100BASE-TX Fast Ethernet,
IEEE 802.3ab 1000BAS-T Gigabit Ethernet,
IEEE 802.3x Flow Control
Compatible with major network software, including
Windows, NetWare and Linux
RJ-45 connector for 10BASE-T, 100BASE-TX, or
1000BASE-T Ethernet interfaces
25 W max
330x207x43mm /
13x8.15x1.70 inch
2kg/4.4 lbs
0 to 40º C (32 to 104º F)
90% maximum relative humidity, noncondensing
VCCI Class A/TUV/FCC Class A/CE/C-tick
UL, CUL
Frame filter rate:
1,480,000 for 1000 Mbps
1,48,000 for 100 Mbps
14,800 for 10 Mbps
Frame forward rate:
1,480,000 for 1000 Mbps
1,48,000 for 100 Mbps
14,800 for 10 Mbps
Network latency (Using 64-byte packets) 1000 Mbps to
1000 Mbps: 20 µs max
MAC Address database size: 8,000
2 Mb
JGS524
Standards Compatibility
Network Interface
Power
Dimensions
Weight
Environmental Specifications
Operating Temperature
Operating Humidity
Electromagnetic Compliance
Safety Agency Approvals
Performance Specifications
Packet Buffer Memory
40 W max
330x207x43mm /
13x8.15x1.70 inch
2kg/4.4 lbs
201-10161-01
