NETGEAR Orbi RBRE950 User Manual Download Page 12

Page: 12 / 160

Table 2. Router LED behavior (Continued)

Description

LED color

The router is not connected to the Internet.

Solid magenta

The router connected to the Internet and is
working normally.

Off

Orbi satellite overview

The following sections are an overview of the Orbi satellite hardware features and LED
behavior. These sections apply to both model RBS960 and model RBS950.

Orbi satellite hardware features

The following figures shows the Orbi satellite hardware features.

Figure 2. Orbi satellite front and back views

1. Satellite LED: Use the LED on the front of the router to determine its status. For

more information about the LED behavior, see Orbi satellite LED behavior on page
13.

2. Sync button: Use the Sync button to connect the satellite to the router. For more

User Manual

Overview

Orbi Quad-Band Mesh WiFi 6E System

Summary of Contents for Orbi RBRE950

































































































































































Search results

Summary of Contents for Orbi RBRE950

Reviews:

Related manuals for Orbi RBRE950

Brands by name

Popular brands

NETGEAR Orbi RBRE950, User Manual

Search results

Summary of Contents for Orbi RBRE950

Reviews:

Related manuals for Orbi RBRE950

Brands by name

Popular brands