background image

Step 1: Connect the Orbi Pro WiFi 6 router

Blue

The connection between the router and satellite is good.

Amber

The connection between the router and satellite is fair. Consider moving the satellite closer to the 
router.

Magenta

The satellite was unable to connect to the router. Move the satellite closer to the router.

Troubleshooting 

If the bar LED lights magenta and does not light white within a couple of minutes, resync the router and satellite. First, 
press the 

Sync 

button on the back of the router, and within two minutes, press the 

Sync

 buttton on the back of the 

satellite. The satellite’s bar LED lights white, then lights blue to indicate a good connection, and then turns off.

When the Orbi Pro WiFi 6 satellite tries to sync with the router, the bar LED lights one of the following colors for several 
minutes, and then turns off:

Satellite bar LED sync information

Visit 

netgear.com/support

 to get your questions answered and access the latest downloads. 

You can also check out our NETGEAR Community for helpful advice at 

community.netgear.com

.

NETGEAR, Inc. 

350 East Plumeria Drive 

San Jose, CA 95134, USA

May 2021

NETGEAR INTERNATIONAL LTD

 

Floor 1, Building 3 

University Technology Centre  

Curraheen Road, Cork, 

T12EF21, Ireland 

Support and Community

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à  

https://www.netgear.com/support/download/

.

(If this product is sold in Canada, you can access this document in Canadian French at  

https://www.netgear.com/support/download/

.)

For regulatory compliance information including the EU Declaration of Conformity, visit  

https://www.netgear.com/about/regulatory/

.

See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit 

https://www.netgear.com/about/privacy-policy

.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at 

https://www.netgear.com/about/terms-and-conditions

. If you do not agree, return the device to your place of purchase 

within your return period.

Manage and monitor your Orbi Pro WiFi 6 network

To enable other Orbi Pro features, and manage and monitor your Orbi Pro WiFi 6 network and devices, you can log 

back in to the router web interface using the unique password that you specified during setup, or if you want remote 

management and advanced services, Insight Pro and Insight Premium subscribers can use the NETGEAR Insight cloud 
portal and app. 

For more information on configuring your device through the router web interface, see the Orbi Pro WiFi 6 user manual 

see the user manual, which you can download by visiting 

netgear.com/support/download

NETGEAR Insight 

You can become a NETGEAR Insight Premium or Pro subscriber to enjoy the benefits of remote management and 
monitoring, and to receive automated notifications about your Insight managed network. Subscriptions for advanced 

Insight services are also available for purchase. 

Your Orbi Pro WiFi 6 device might come with 1-year Insight included. New users might also be eligible for an Insight 
Premium 1-Month Trial subscription. Certain restrictions apply. For more information, visit  

https://www.netgear.com/insight/

.

The Orbi Pro WiFi 6 router (model SXR80) can be used alone, or supports up to six satellites. 

The back of the Orbi Pro WiFi 6 router has one yellow WAN port and four LAN ports. The label on the router displays 
model SXR80, and the preset WiFi network name (SSID) and password.

1.  To set up a WiFi network with Internet, the router must connect to a modem or a gateway that provides Internet. 

•  If you use a modem, unplug the modem, remove and then reinsert the backup battery if it uses one, and plug the 

modem back in. 

•  If you use a gateway, we recommend that you turn off your gateway’s WiFi. 

2.  Use an Ethernet cable to connect your modem or gateway to the yellow WAN port on the back of your Orbi Pro 

WiFi 6 router.

3.  Connect the router to a power source.

The Power LED on the back of the router lights green.

4.  When the bar LED on the front of the router lights solid white, the router’s preset WiFi network is ready for setup. 

The router’s bar LED turns off after about three minutes.

Note: 

The Orbi Pro WiFi 6 router cannot support or pair with Orbi Home satellites or Orbi Pro WiFi 5 satellites. 

© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. 

Any non-NETGEAR trademarks are used for reference purposes only.

Step 3: Set up the WiFi network’s Internet connection

1.  Connect your WiFi-enabled computer or mobile device to the router using a WiFi or Ethernet connection:

•  WiFi

. Use the preset WiFi network name (SSID) and password on the router label to connect to the Orbi WiFi 

network.

•  Ethernet

. Use an Ethernet cable to connect your computer to the router. 

2.  Launch a web browser and type 

orbilogin.com

 in the address field.

If a security warning displays, see 

https://kb.netgear.com/000062980

 for information on how to dismiss the message.

3.  The interactive Internet setup process starts. This process can take several minutes to complete.

When you complete the process, your settings are applied, and the devices restart.

The router’s bar LED turns off when the setup completes. You can unplug and move the satellite to the desired 
location.

Step 4. Sync an add-on satellite to the router (optional)

If you want to extend your WiFi coverage, you can purchase an Orbi Pro WiFi 6 satellite (model SXS80) separately. The 

first time that you sync the satellite with the router, the process can take up to five minutes to complete.

To sync an add-on Orbi Pro WiFi 6 satellite:

1.  Place the satellite approximately 10 ft. away from the router, facing the router, with a direct line of sight.
2.  Connect the satellite to a power source.

The power LED on the back of the satellite lights green.

After approximately two minutes, the satellite bar LED on the front of the satellite lights solid white.

3.  Press the 

Sync 

button on the back of the satellite, and within two minutes, press the 

Sync

 buttton on the back of the 

router. 
The satellite bar LED pulses white, and then lights blue.

If the bar LED lights amber or magenta, see 

Satellite bar LED sync information

.

Step 2: Connect an Orbi Pro WiFi 6 satellite from a kit (optional)

If you purchased an Orbi Pro WiFi 6 router with a satellite as a kit, the satellite is already paired with the router. If you 
purchased a satellite separately, see 

Step 4. Sync an add-on satellite to the router (optional)

.

1.  Place the satellite approximately 10 ft. away from the router, facing the router, with a direct line of sight.
2.  Connect the satellite to a power source. 

The Power LED on the back of the satellite lights green.

The Bar LED on the front of the satellite pulses white while booting up.

3.  When the bar LED on the satellite lights blue, the connection between the router and satellite is good.

If the bar LED lights amber or magenta, see 

Satellite bar LED sync information

Note: 

The Orbi Pro WiFi 6 satellite cannot pair with the Orbi Home routers or the Orbi Pro WiFi 5 router.

Step 5. Place the satellite at the desired location (optional)

Place the Orbi Pro WiFi 6 satellite at the location where you want WiFi coverage. The satellite must be within range of the 
router or another Orbi Pro satellite that is connected to the router. The router supports a maximum of six satellites. 

For information on optimal placement in home offices see 

https://kb.netgear.com/31029

, or for business and commercial 

installations see 

https://kb.netgear.com/000045858/

.

To place your Orbi Pro WiFi 6 satellite:

1.  Place the satellite in the desired location. 
2. 

Connect the satellite to a power source, and confirm that the bar LED lights blue.  

If the satellite bar LED lights amber, indicating that the connection is fair but not good, consider moving the satellite 
closer to the router.

3.  If adding more than one satellite, repeat steps 1 and 2 of this procedure. 
4. 

(Optional) After you confirm that the satellite has a good connection to the router, the devices can be mounted. 

For more information, see 

Prepare the wall mount

 and 

Wall-mount the Orbi Pro WiFi 6

.  

Summary of Contents for Orbi Pro WiFI 6









Reviews: