Changes Are Not Saved
If the router does not save the changes that you make on the routerweb pages, do the following:
•
When entering configuration settings, always click the Apply button before moving to another page or tab, or
your changes are lost.
•
Click the Refresh or Reload button in the web browser. It is possible that the changes occurred, but the old
settings might be in the web browser’s cache.
Troubleshoot WiFi Connectivity
If you are experiencing trouble connecting over WiFi to the router, try to isolate the problem:
•
Does the WiFi device or computer that you are using find your WiFi network?
If not, check the WiFi LED on the front of the router. If it is off, you can press the WiFi On/Off button on the
router to turn the router WiFi radios back on.
If you disabled the router’s SSID broadcast, then your WiFi network is hidden and does not display in your WiFi
client’s scanning list. (By default, SSID broadcast is enabled.)
•
Does your WiFi device support the security that you are using for your WiFi network (WPA or WPA2)?
•
If you want to view the WiFi settings for the router, use an Ethernet cable to connect a computer to a LAN port
on the router. Then log in to the router, and select BASIC > Wireless.
Be sure to click the Apply button if you change settings.
Note
If your WiFi device finds your network but the signal strength is weak, check these conditions:
•
Is your router too far from your computer or too close? Place your computer near the router but at least 6 feet
(1.8 meters) away and see whether the signal strength improves.
•
Are objects between the router and your computer blocking the WiFi signal?
Troubleshoot Your Network Using the Ping Utility
Most network devices and routers contain a ping utility that sends an echo request packet to the designated device.
The device then responds with an echo reply. You can easily troubleshoot a network using the ping utility in your
computer or workstation.
Test the LAN Path to Your Router
You can ping the router from your computer to verify that the LAN path to your router is set up correctly.
To ping the router from a Windows computer:
1.
From the Windows toolbar, click the Start button and select Run.
2.
In the field provided, type ping followed by the IP address of the router, as in this example:
Troubleshooting
154
Nighthawk X4S AC2600 Smart WiFi Router
