NETGEAR Nighthawk AX4 User Manual Download | Manualshive

Page: 92 / 156

background image

When the upload is complete, your router restarts. The update process typically
takes about one minute. Read the new firmware release notes to find out if you must
reconfigure the router after updating.

Manually upload firmware to the router

If you want to upload a specific firmware version, or your router fails to update its firmware
automatically, follow these instructions.

Note: We recommend that you connect a computer to the router using an Ethernet
connection to upload the firmware.

To manually upload a firmware file to your router:

1. Download the firmware for your router from the NETGEAR Download Center, save

it to your desktop, and unzip the file if needed.

Note: The correct firmware file uses an

.img

or

.chk

extension.

2. Launch a web browser from a computer that is connected to the router network.

3. Enter http://www.routerlogin.net.

A login window opens.

4. Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

5. Select ADVANCED > Administration > Router Update.

The Router Update page displays.

6. Click the Browse button.

7. Find and select the firmware file on your computer.

8. Click the Upload button.

The router begins the upload.

Note: To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not close the browser, click a link, or load a new page. Do not turn off
the router. Wait until the router finishes restarting. If your router does not reboot,
check the Router Status page to confirm whether the new firmware version uploaded.

User Manual

92

Manage Your Router

Nighthawk AX4 4-Stream AX3000 WiFi Router

«
...
90
91
92
93
94
...
»

Summary of Contents for Nighthawk AX4





























































































































































Reviews:

No comments

Related manuals for Nighthawk AX4

Brand: H3C Pages: 22

Brand: H3C Pages: 3

Brand: LaCie Pages: 44

LaCie Ethernet Disk

Brand: LaCie Pages: 2

5big - Network NAS Server

Brand: LaCie Pages: 9

Brand: LaCie Pages: 14

12big Rack Fibre 8

Brand: LaCie Pages: 9

Brand: US Robotics Pages: 36

Brand: EnGenius Pages: 3

Brand: UfiSpace Pages: 35

Brand: insys icom Pages: 4

OP-8000-EDFA-1U Series

Brand: Optostar Pages: 9

Brand: Dataprobe Pages: 16

Brand: ADDON Pages: 4

Airborne M2M ABDN-er-DP55 Series

Brand: B+B SmartWorx Pages: 120

BIANCA/BRICK XS

Brand: BinTec Pages: 2

Brand: Laguna Tools Pages: 24

Brand: Baicells Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands