NETGEAR MS70 User Manual Download Page 150

Page: 150 / 150

Table 7. Technical specifications for the satellite (Continued)

Description

Feature

2.4 GHz:
• 2.412–2.462 GHz (US)

• 2.412–2.472 GHz (Europe ETSI)

5 GHz:
• 5.18 GHz–5.24 GHz, 5.26 GHz–5.32 GHz, 5.5 GHz–5.7 GHz,

and 5.745 GHz–5.825 GHz (US)

• 5.18 GHz–5.24 GHz and 5.5 GHz–5.7 GHz (Europe)

• 5.26 GHz–5.32 GHz (Europe)

Operating frequency range

WPA-PSK [TKIP], WPA2-PSK [AES], WPA3-Personal

802.11 security

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network

conditions and environmental factors, including volume of network traffic, building materials and construction, and

network overhead, lower actual data throughput rate.

User Manual

150

Supplemental Information

Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite

Summary of Contents for MS70























































































































































Search results

Summary of Contents for MS70

Reviews:

Related manuals for MS70

Brands by name

Popular brands

NETGEAR MS70, User Manual

Search results

Summary of Contents for MS70

Reviews:

Related manuals for MS70

Brands by name

Popular brands