NETGEAR MS510TXM, Hardware Installation Manual, Page: 15 / 38

Table 3. Front panel components model MS510TXUP (Continued)
Description Component
Four independent 2.5GBASE-T RJ-45 PoE++ ports that also support 100/1000BASE-T.
Each port provides a left LED that functions as the combined link, speed, and activity
LED and a right LED that provides PoE information.
For more information about the LEDs, see LEDs model MS510TXUP on page 15. For
more information about the PoE++ ports, see PoE port capacities and budget for model
MS510TXUP on page 19. Ports 1, 2, 3, and 4
Four independent 2.5G/5G/10GBASE-T RJ-45 PoE++ ports (also supporting
100/1000BASE-T). Each port provides a left LED that functions as the combined link,
speed, and activity LED and a right LED that provides PoE information.
For more information about the LEDs, see LEDs model MS510TXUP on page 15. For
more information about the PoE++ ports, see PoE port capacities and budget for model
MS510TXUP on page 19. Ports 5, 6, 7, and 8
Two independent SFP+ ports in which you can install transceiver modules and direct
attach cables (see Transceiver modules and cables for SFP+ fiber ports on page 18).
These ports support 10G or 1G fiber transceiver modules. Each port provides a single
LED that functions as the combined link, speed, and activity LED.
For more information about the LEDs, see LEDs model MS510TXUP on page 15. Ports 9F and 10F
LEDs model MS510TXUP
The following table describes the LEDs on the front panel of model MS510TXUP. Ports
1–8 each provide a left LED and right LED. Ports 9F and 10F each provide a single LED.
Table 4. LEDs on the front panel of model MS510TXUP
Description LED
Blinking green: The switch is booting.
Solid green: The switch is powered on and operating normally. If you changed the
management mode of the switch to NETGEAR Insight, the switch is not yet added to an
Insight managed network or not yet connected to the Insight cloud management server.
Solid blue: The management mode of the switch is NETGEAR Insight, the switch is added
to an Insight managed network, and the switch is connected to the Insight cloud
management server. You can manage and monitor the switch using the NETGEAR Insight
app or Insight Cloud portal.
Off: Power is not supplied to the switch. Power LED
Solid green: The fans are operating normally.
Solid yellow: A problem occurred with the fans. Fan LED
Off: More than 7W of PoE power is available.
Solid yellow: Less than 7W of PoE power is available.
Blinking yellow: The PoE Max LED was active in the previous two minutes. PoE Max LED
Hardware Installation Guide 15 Hardware Overview
8-Port Multi-Gigabit/10G Ethernet (Ultra60 PoE++) Smart Managed Pro Switch with 2 SFP+ Ports