Overview
The switch provides eight Gigabit Ethernet multispeed copper ports and two dedicated
SFP+ fiber uplink ports that support 10G and 1G. Four of the multispeed copper ports
support both 1G and 2.5G and each of the other four multispeed copper ports supports
1G, 2.5G, 5G, and 10G. All copper ports use RJ-45 connectors.
The SFP+ ports require standard small form-factor pluggable (SFP) gigabit interface
converters (GBICs, also referred to as a transceiver modules), which are sold separately
from the switch. The switch integrates 140 Gbps line-rate, full-duplex, nonblocking
switch fabric.
The PoE model supports Ultra60 PoE++ (802.3bt) on all copper ports (that is, up to 60W
PoE++ to each port) with a maximum PoE power budget of 295W across all active PoE++
ports.
Note: For information about application examples, see Applications on page 21.
You can install the switch freestanding or rack mounted in a wiring closet or equipment
room. The switch is IEEE compliant and offers low latency. All ports can automatically
negotiate to the highest speed, which makes the switch very suitable for a mixed
environment with multispeed Gigabit Ethernet, Gigabit Ethernet, and Fast Ethernet.
For speeds of 10 Gbps, use Category 6 (Cat 6) cables terminated with RJ-45 connectors;
for speeds from 5 Gbps to 10 Gbps, use Cat 5e cables terminated with RJ-45 connectors;
and for speeds from 10 Mbps to 5 Gbps, including 2.5 Gbps, use Cat 5e or higher-rated
Ethernet cables terminated with RJ-45 connectors.
Features
The switch supports the following key hardware features:
•
Four multispeed Ethernet ports (5–8), each of which supports 10G, 5G, 2.5G, 1G,
and 100M.
•
Four multispeed Ethernet ports (1–4), each of which supports 2.5G, 1G, and 100M.
•
Two dedicated SFP+ fiber uplink ports (9F and 10F), each of which is capable of 10G
and 1G.
•
PoE support for model MS510TXUP:
-
Eight Ultra60 PoE++ (802.3bt) ports
-
Total PoE power budget of 295W for the switch
Hardware Installation Guide
6
Introduction
8-Port Multi-Gigabit/10G Ethernet (Ultra60 PoE++) Smart Managed Pro Switch with 2 SFP+ Ports