manualshive.com logo in svg

NETGEAR MR814 - 802.11b Cable/DSL Wireless Router, Reference Manual

Share
Download
NETGEAR MR814 - 802.11b Cable/DSL Wireless Router Reference Manual Download Page 114

Reference Manual for the MR814 v3 Cable/DSL Wireless Router 

C-2

Preparing Your Network

202-10039-01

For the initial setup of your router, you will need to connect a computer to the router. This 
computer has to be set to automatically get its TCP/IP configuration from the router via DHCP.

Note: 

For help with DHCP configuration, please use the Windows TCP/IP Configuration 

Tutorials on the 

MR814 v3 Resource CD (2230-10095-01 )

, or in this appendix.

Internet Configuration Requirements

Depending on how your Internet service set up your account, you may need one or more of these 
configuration parameters to connect your router to the Internet: 

•

Host and Domain Names

•

ISP Login Name and Password

•

ISP Domain Name Server (DNS) Addresses

•

Fixed IP Address which is also known as Static IP Address

Where Do I Get the Internet Configuration Parameters?

There are several ways you can gather the required Internet connection information.

•

Your Internet service provides all the information needed to connect to the Internet. If you 
cannot locate this information, you can ask your Internet service to provide it or you can try 
one of the options below.

•

If you have a computer already connected using the Internet, you can gather the configuration 
information from that computer.

— For Windows 95/98/ME, open the Network control panel, select the TCP/IP entry for the 

Ethernet adapter, and click Properties. Record all the settings for each tab page.

— For Windows 2000/XP, open the Local Area Network Connection, select the TCP/IP entry 

for the Ethernet adapter, and click Properties. Record all the settings for each tab page.

— For Macintosh computers, record the settings in the TCP/IP or Network control panel. 

•

You may also refer to the 

MR814 v3 Resource CD (2230-10095-01 )

 for the NETGEAR 

Router ISP Guide which provides Internet connection information for many ISPs.

Once you locate your Internet configuration parameters, you may want to record them on the page 
below.

Summary of Contents for MR814 - 802.11b Cable/DSL Wireless Router



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands