NETGEAR MR1100 User Manual Download

Page: 73 / 86

Tap

Power.

The Power Options page displays.

Tap REBOOT DEVICE.

The mobile router reboots.

Reboot the Mobile Router From a Web Browser

To reboot the mobile router from a web browser:

From a computer that is connected to your network, launch a web browser.

Enter http://192.168.1.1.

A login page displays.

Enter the administrator login password.

The password is case-sensitive.

The dashboard displays.

In the upper, right corner, click the menu icon.

The menu opens.

Select Reboot.

When prompted, click the REBOOT button.

The mobile router reboots.

Power Off the Mobile Router

You can use the Power button on the mobile router to turn it off, or you can log in to the mobile router with
a browser and shut down the mobile router.

Power Off the Mobile Router Manually

To power off the mobile router manually:

Press and hold the Power button on the device for a few seconds.

Power Off the Mobile Router From the NETGEAR Mobile App

Power off the mobile router from the NETGEAR Mobile app:

On your smartphone, connect to the mobile router’s WiFi network.

Launch the NETGEAR Mobile app.

Swipe down.

The dashboard displays.

Manage Your Mobile Router Network

Nighthawk LTE Mobile Hotspot Router Model MR1100

Summary of Contents for MR1100























































































Search results

Summary of Contents for MR1100

Reviews:

Related manuals for MR1100

Brands by name

Popular brands

NETGEAR MR1100, User Manual

Search results

Summary of Contents for MR1100

Reviews:

Related manuals for MR1100

Brands by name

Popular brands