11
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used according to
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment or devices
•
Connect the equipment to an outlet other than the receiver’s
•
Consult a dealer or an experienced radio/TV technician for assistance
FCC Caution: Any change or modification to the product not expressly
approved by NETGEAR could void the user’s authority to operate the device.
FCC RF Radiation Exposure and SAR Statements
SAR Statement
The NETGEAR MC1001v3 has been tested for body-worn Specific
Absorption Rate (SAR) compliance. The FCC has established detailed SAR
requirements and has established that these requirements have been met
while installed in host notebook computer.
RF Exposure Information
The radio module has been evaluated under FCC Bulletin OET 65C (01-01)
and found to be compliant to the requirements as set forth in CFR 47
Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio
frequency devices. This model meets the applicable government
requirements for exposure to radio frequency waves. The highest SAR level
measured for this device was 1.380 W/kg.
