manualshive.com logo in svg

NETGEAR MA401 - 802.11b Wireless PC Card, Installation Manual

Share
Download
NETGEAR MA401 - 802.11b Wireless PC Card Installation Manual Download Page 23

20

Troubleshooting Tips

If you have problems connected to your wireless network, try the tips below.

Symptom

Cause

Solution

The PC Card 
LED is not lit.

The wireless PC 
card is not 
inserted into the 
slot properly or 
the proper 
wireless MA401 
PC Card software 
is not loaded. 

Remove and reinsert the wireless PC 
Card.

Check the device manager in 
Windows to see if the PC Card is 
recognized in the Windows operating 
system. Reload the driver if necessary.

Try to install the MA401 in a different 
PCMCIA slot on your system if one is 
available.

The LED is 
blinking 
repeatedly. 

The wireless PC 
Card is 
attempting to 
connect to access 
point but cannot 
connect. 

The access point may not be powered 
on.

The access point and the PC card are 
not configured with the same wireless 
parameters. Check the SSID and WEP 
settings.

I can connect 
to an access 
point, but I do 
not see the 
other 
computers on 
the network.

This could be a 
physical layer 
problem or a 
network 
configuration 
problem.

Check to make sure that the access 
point is physically connected to the 
Ethernet network.

Make sure that the IP addresses and 
the Windows networking parameters 
are all configured correctly.

Summary of Contents for MA401 - 802.11b Wireless PC Card





























Reviews:

No comments

Brands by name

Popular brands

Load more brands