3.
Select Settings > Advanced > LAN.
4.
In the IP address field, enter a new IP address.
The default IP address is 192.168.5.1.
The Submit button displays after you change the IP address.
5.
In the Netmask field, enter a new network mask.
The default network mask is 255.255.255.0.
6.
Click the Submit button.
Your settings are saved and the modem restarts. A device that is connected to the modem is disconnected
when the modem restarts. You can reconnect the device to the modem using the new IP address of the
modem.
Manage Router Mode and Bridge Mode
By default, Router mode is enabled on the modem. By connecting the modem to an Ethernet switch or hub,
you can connect multiple Ethernet devices such as printers, credit card terminals, and computers to the
modem.
In Router mode, Network Address Translation (NAT) is enabled, the built-in Dynamic Host Configuration
Protocol (DHCP) server is enabled to assign a LAN IP address to each connected device, and IP pass-through
(IPPT) is disabled.
Manage the Modem LAN Settings
22
LTE Modem LB1110 and LB1111
