54Mbps Wireless Router Model KWGR614 Reference Manual
Wireless Configuration
2-15
v1.2, September 2006
4.
Click
Apply
to save your settings.
How to Restrict Wireless Access by MAC Address
To restrict access based on MAC addresses, follow these steps:
1.
Log in to the KWGR614 wireless router at URL
http://www.routerlogin.net.
Enter the default
user name of
admin
and default password of
password
, or whatever LAN address and
password you have set up.
2.
Click
Wireless Settings
in the
Advanced
section of the main menu of the KWGR614 wireless
router.
3.
From the Wireless Settings menu, click
Setup Access List
to display the Wireless Access
menu shown below.
Note:
If you use a wireless computer to configure WPA-PSK or WPA2-PSK settings, you
will be disconnected when you click
Apply
. You must then either configure your
wireless adapter to match the wireless router WPA settings or access the wireless
router from a wired computer to make any further changes.
Note:
When configuring the wireless router from a wireless computer whose MAC
address is not in the Trusted PC list, if you select
Turn Access Control On
,
you will lose your wireless connection when you click on
Apply
. You must
then access the wireless router from a wired computer or from a wireless
computer which is on the access control list to make any further changes.
Figure 2-7
