4
3 - Configuring the Switch management IP address
The Management IP address (by default on VLAN1) can be setup using the CLI (Command Line
Interface).
The CLI should be access via HyperTerminal (or similar applications) using the Console cable
included in the box.
----------------------------------------------------------------------------------------------------------------------------- ----
User: admin
Password:
(FSM7352S) >enable
Password:
(GSM7352S) #
(GSM7352S) #network protocol none
Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n)y
(GSM7352S) #network parms 192.168.1.1 255.255.255.0 192.168.1.254
(GSM7352S) #show network
IP Address..................................... 192.168.1.1
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 192.168.1.254
Burned In MAC Address.......................... 00:1F:33:E6:81:A5
Locally Administered MAC Address............... 00:00:00:00:00:00
MAC Address Type............................... Burned In
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1
Web Mode....................................... Enable
Java Mode...................................... Enable
(GSM7352S) #
----------------------------------------------------------------------------------------------------------------------------- ----
Summary of Contents for GSM7248v2 - ProSafe 48 Port Layer 2 Gigabit L2 Ethernet Switch
Page 15: ...15 ...
