NETGEAR GS108Tv3 User Manual Download Page 57 | Manualshive

Page: 57 / 492

NETGEAR GS108Tv3 User Manual Download Page 57

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

57

Configure the IP network settings for

management access

You can configure network information for the local browser interface, which is the logical
interface used for in-band connectivity with the switch through any of the switch’s front-panel
ports. The settings associated with the local browser interface do not affect the configuration
of the front panel ports through which traffic is switched or routed.

Configure the IPv4 network and VLAN settings for the

local browser interface

You can configure the IPv4 network information for the local browser interface, which is the
logical interface used for in-band connectivity with the switch through any of the switch’s
front-panel ports.

To configure the IPv4 network and VLAN settings for the local browser interface:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

.

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

4.

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser interface on

5.

Click the

Login

button.

The System Information page displays.

6.

Select

System > Management > IP Configuration

.

«
...
55
56
57
58
59
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments