manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 403 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 403

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

403

The following table describes the nonconfigurable information displayed on the page.

Table 72.  IP Binding Status table

 

Field

Description

Interface

The selected interface.

Direction

The selected packet filtering direction for the ACL, which is always Inbound.

ACL Type

The type of ACL assigned to the selected interface and direction.

ACL ID 

The ACL number or name identifying the ACL assigned to the selected interface and 
direction.

Sequence Number

The sequence number signifying the order of specified ACL relative to other ACLs 
assigned to the selected interface and direction.

View or delete IP ACL bindings in the IP ACL binding table

You can view or delete bindings for basic IPv4, extended IPv4, and IPv6 ACLs.

To view or delete IP ACL bindings: 

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Security > ACL > Advanced > Binding Table

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments