manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 315 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 315

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

315

9. 

From the menu in the 2 column, select the authentication method, if any, that must be used 
second in the selected authentication login list. 

This is the method that is used if the first method times out. If you select a method that 
does not time out as the second method, the third method is not tried. 

10. 

From the menu in the 3 column, select the authentication method, if any, that must be used 
third in the selected authentication login list. 

11. 

From the menu in the 4 column, select the method, if any, that must be used fourth in the 
selected authentication login list. 

This is the method that is used if all previous methods time out.

12. 

Click the 

Apply

 button. 

Your settings are saved.

Configure an HTTPS authentication list

You can configure the default login list for secure HTTP (HTTPS).

To configure an HTTPS authentication list:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Security > Management Security > Authentication List > HTTPS Authentication 

List

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments