manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 177 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 177

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

177

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching > Auto-VoIP > Auto-VoIP Status

.

The Auto-VoIP Status page displays.

7. 

To refresh the page with the latest information about the switch, click the 

Update

 button.

The following table describes the nonconfigurable Auto-VoIP status information.

Table 32.  Auto-VoIP status

 

Field

Description

Auto-VoIP VLAN ID

The Auto-VoIP VLAN ID. (The default VLAN ID is 4088.)

Maximum Number of Voice Channels 
Supported

The maximum number of voice channels supported.

Number of Voice Channels Detected

The number of VoIP channels prioritized successfully.

Configure Spanning Tree Protocol

The Spanning Tree Protocol (STP) provides a tree topology for any arrangement of network 
devices. STP also provides one path between end stations on a network, eliminating loops. 
STP

 

(also

 

referred to as “classic” STP) provides a single path between end stations, avoiding 

and eliminating loops. For information about configuring the global STP settings for the 
switch, see 

Configure the STP settings and view the STP status on page

 

178

.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments