manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 160 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 160

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

160

Configure a MAC-based VLAN

The MAC-Based VLAN feature allows incoming untagged packets to be assigned to a VLAN 
and thus classify traffic based on the source MAC address of the packet.

You define a MAC-to-VLAN mapping by configuring an entry in the MAC-to-VLAN table. An 
entry is specified through a source MAC address and a VLAN ID. The MAC-to-VLAN 
configurations are shared across all ports of the switch (that is, a system-wide table exists 
with MAC address–to–VLAN ID mappings).

When untagged or priority-tagged packets arrive at the switch and entries exist in the 
MAC-to-VLAN table, the source MAC address of the packet is looked up. If an entry is found, 
the corresponding VLAN ID is assigned to the packet. If the packet is already priority-tagged, 
it maintains this value. Otherwise, the priority is set to zero. The assigned VLAN ID is verified 
against the VLAN table. If the VLAN is valid, ingress processing on the packet continues. 
Otherwise, the packet is dropped. This implies that you can configure a MAC address 
mapping to a VLAN that you did not yet create on the switch.

Add a MAC-based VLAN

To add a MAC-based VLAN:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Switching

> VLAN > Advanced > MAC Based VLAN

. 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments