NETGEAR GS108Tv3, User Manual, Page: 134 / 492

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure System Information User Manual 134
Specify the settings for a recurring PoE timer schedule
A recurring schedule allows you to set up a single schedule that starts at a particular date and
that recurs either with a specific end date or indefinitely.
For a single recurring PoE timer schedule, you can add a daily, weekly, and monthly schedule
configuration. That is, these schedule configurations are not mutually exclusive but
complement each other.
To specify the settings for a PoE timer schedule that uses a recurring pattern:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19
or
Access the switch off-network on page 30
.
The login page displays.
If the NETGEAR Business page displays, see
Register and access the switch with your
NETGEAR account on page 34
.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password .
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser interface on
page 32
.
5. Click the Login button.
The System Information page displays.
6. Select System

> Timer Schedule > Advanced > Timer Schedule Configuration .
The Timer Schedule Configuration page displays.
7. In the Timer Schedule Selection section, make your selections from the following menus:
a. Timer Schedule Name . Select the name of the timer schedule that you want to
configure.
You can select only names of schedules that you created (see
Create a PoE timer
schedule on page 131
).
b. Timer Schedule Type . Select Periodic .